High Pressure Cold Water Jet (QL-390)
Approx. Rs 26,100 / Unit
- Minimum Order Quantity: 1 Unit
- Automation Grade: Automatic
- Voltage: 220V
- Water Flow: 15 LPM
- Power: 2.15 HP
- Frequency: 50Hz
- Industry Type: Automobile Industry, Manufacturing Industry
High Pressure Cold Water Jet (QL-390) is intended for industrial use.
Features :
- Low water discharge
- High pressure Surface Cleaning
- Drain cleaning
- Tank cleaning
- Building washing
- Car washing
- Reciprocating Pumps
- Triplex Plunger
- Industrial grade
- Continues Duties
- Brass Unloader valve with by-pass
Specifications :
| Model | VOLT | WATER FLOW (LPM) | PRESSURE (BAR) | POWER ( HP) | Weight |
| QL-390 | 220V, 50Hz | 15 | 80 | 2.15 | 2800 |
Scaffolding Hoist
Approx. Rs 32,800 / Unit
Scaffolding Hoist is intended for industrial use.
Features :
- Can be Suspended form the existing Scaffolding
- No additional expense for Suspension device
Specifications :
| Model | HXS-250F |
| Roated Load(Kg) | 250 |
| Roted Volt(V) | 50/60Hz |
| Input Power (W) | 1200 |
| Cable Diameter(mm) | Ø4.2 |
| Lifting Speed(m/min) | 12 |
| Lifting Height(m) | 20 |
| G.W./N.W.(Kg) | 30/29 |
| Packing Size(mm) | 425x365x370 |
- Minimum Order Quantity: 1 Unit
Construction Hoist
Approx. Rs 12.8 Lakh / Unit
- Minimum Order Quantity: 1 Unit
- Trolley Option: With Trolley
- Mounting: Crane Mounted
- No of Cages: 1
- Lifting Speed: 33 m/min
- Voltage: 415 V
- Frequency: 50 Hz
- Power Source: Electric
- Type: Multi Function Hoist
The multifunctional building hoist can be used for transporting men and material. It is much more efficient and safe compared to the conventional wire rope windlass systems in use, Our hoists use Rack and Pinions for lifting which is very safe, Compared to wire rope types and other conventional methods.
The rack and pinions are made from special alloy steels and are heat treated for strength and wear resistance.
Model Overview:| MODEL | SC100 | SC150 |
| Rated Capacity | 1000 kg | 1500 kg |
| Cage Size (Outer) | 2.1x1.2x2.2 | 3.0x1.5x2.5 |
| No of Cages | 1 | 1 |
| Height (Max Possible) | 150 mtr | 200 mtr |
| Lifting Speed | 33m/min | 33m/min |
| Motor Power | 2x7.5 kw | 2x11 kw |
| Mast Section | "Ø60 x 4.5 thick 450mm x 450mm x 1508mm" | "Ø76 x 4.5 thick 650mm x 650mm x 1508mm" |
| Voltage | 415 V - 50 Hz | 415 V - 50 Hz |
| Safety Device Model | SAJ30-1.2 | SAJ40-1.2A |
Rebar Welding Machine
Approx. Rs 84,000 / Unit
Rebar Bar Welder-
Features:-
- UN4 Series Manual Butt Welding Machine is one kind of manual lever pressuring type of welding, the welding pressure is by way of a manual control lever on the workpiece to achieve the butt flash butt welding and resistance butt welding.
- It is mainly used for butt welding variety of steel and Non-ferrous metals, such as low carbon steel, carbon steel, stainless steel and nonferrous metal round wire, flat wire, round steel, flat steel, rebar steel, and so on.
- Because this kind of butt welding machine no need air compressor, simple operation, easy to move, stable quality, therefore widely used for the field of construction, express way, bridge, steel wire drawing plant, cement prefabricated factory, metal products and so on. Especially suitable for using in the construction field and country side.
Technical Specifications:-
| Phase | Single Phase |
| Current | 263 Amp. |
| Capacity | 100 KVA |
| Max. Bar Dia | Ø6-26 mm |
| Current type | DC |
Company Details
ReBar Welder is intended for use at construction site for welding and Joining of cut lengths of rebars.
Specifications :
| Phase | Single Phase |
| Current | 263 Amp. |
| Capacity | 100 KVA |
| Max. Bar Dia | Ø6-26 mm |
| Current type | DC |
- Minimum Order Quantity: 1 Unit
