CONSTRUCTION EQUIPMENT

• Minimum Order Quantity: 1 Unit
• Automatic Grade: Automatic
• Model: HGS-40
• Power: 4 KW 3 Phase
• Threading Diameter: 14 - 40 mm
• Threading Length: 80 mm
• Coupler Diameter: 16 - 40 mm
• Weight: 420Kg

Rebar Thread Rolling Machine is intended for industrial use.

• HGS-40 rib peeling and thread rolling machine is compact in structure, stable in operation, and has an automatic opening and closing mechanism for rib peeling. Cycle time is only 30 seconds to finish a threaded end.
• Adopts cold thread rolling technology. does not cut the rebar parent metal, the strength of Rolled Thread is much higher than the parent metal.
• Widely used, is able to process rebar of grades II and III with diameters 16mm- 40mm.
• Easy to operate, no skilled technicians required.
• Economic, low investment for the equipment.
• Threading saves at least 20% wastage of expensive Rebars compared to the conventional Splicing lap procedure.

• Minimum Order Quantity: 1 Unit
• Automatic Grade: Automatic
• Capacity: 5-12 mm
• Working Speed: 15 m/min
• Gear Ratio: 301
• Motor: 4 HP 3 Phase
• Weight: 300 Kg

Bar Straightener is intended for industrial use.

• Minimum Order Quantity: 1 Unit
• Material: Cast Iron
• Model: TDCM 120
• Drum Opening Size: 460 mm
• Handle Diameter: 600 mm
• Tyre Capacity: 230 kg
• Wheel Shaft: 41 mm
• Wheel Size: 400 mm
• Automatic Grade: Automatic
• Charging Capacity: 300 liters
• Drum Gear: 32 mm
• Required Power: 4 HP
• Mixing Drum Speed: 21-25 RPM
• Drum Volume: 350 liters
• Discharge Capacity: 120 liters
• Drum Diameter: 740 mm
• Drum Length: 860 mm
• Drum Blade Size: 4 mm

Concreate Mixers is intended for industrial use.

• Minimum Order Quantity: 1 Unit
• Automatic Grade: Automatic
• Power: 3 HP
• Size: 32 mm
• Driven Type: Electric
• Bending Speed: 3 - 15 r/min
• Voltage: 220 V

Bar Bender is intended for industrial use.

• Rebar bending machine is an ideal rebar bending equipment. It has reasonable design, simple structure and can bend steel rods to any required shape.
• Steel Bar Bender is used for bending all kinds of A3 steel bar and grade II deformed steel bar, it can finish any shape of bending for construction work.
• Rebar fabrication is a time-consuming and complex process. High quality tools used by fabricators who are involved in construction project helps accelerate the project Lokpal Industries reduce the amount of waste.
• The dual angle adjustment device: simultaneously bends in 2 different angles: saving work time
• The adoption of foot-switch guarantees safe operation of the machine

• Minimum Order Quantity: 1 Piece
• No Load Speed: 2200 RPM
• Disc Diameter: 26 mm
• Power Consumption: 2000 Watt
• Brand: Hulk
• Voltage: 220-240 V
• Warranty: 1 year
• Type of Power Source: Electric
• Model No.: JHS-2000

Wall Chaser is intended for industrial use.

• Ergonomic design with soft handle for extra comfort.
• Excellent anti-dust design for excessive dust condition.
• Complete slotting at one time in high efficiency.
• Adjustable chasing depth for different needs.
• Alloy gearbox combines durability with beauty.
• Roller design to reduce the frictional resistance from wall when grooving.
• Long lasting alloy blade tested to last up to 200 hours.
• Equipped with quick cleaning dust extractor system.

• Minimum Order Quantity: 1 Unit
• Installation Service: Yes
• Brand: Hulk
• Automatic Grade: Manual
• Voltage: 440V
• Weight: 250 Kg.
• Width: 750 mm

Vacuum Dewatering System is intended for industrial use.

• Minimum Order Quantity: 1 Unit
• Automation Grade: Automatic
• Brand/Make: Hulk
• Material: Stainless Steel
• Impact frequency: 450-650 / min
• Impact Force: 65 Nm
• Working speed: 10-13 m / min
• Ramming Frequency: 600 - 700 time/min

Vibrating Impact Rammers is intended for industrial use.

• Special 4- stroke engine for the rammer.
• The guide handle built-in shock mount reduces hand-arm vibration.
• Handle kit for easy transportation.
• Special crank and rod system for increased durability.
• Double Cleaner System.
• Heavy-duty shock rubber absorbs kickbacks.
• High-density polyethylene fuel tank eliminates corrosion.
• Rack and pinion throttle lever.

• Minimum Order Quantity: 1 Unit
• Material: Stainless Steel
• Brand: Hulk
• Surface Type: Hot Dipped Galvanized
• Dimension: 16 mm,22 mm 32 mm,40 mm
• Power Source: Electric
• Surface Treatment: Color Plated

Mechanical Bar Splice (Coupler) is a parallel thread mechanical splicing system designed for the connection of concrete reinforcing bars from Ö12~Ö50. Mechanical couplers to splice reinforcing bar has been regarded as a means of reducing the use of long bars and reduce wastage of expensive rebars due to Splice lapping of the ends in the conventional methods of joining rebars. More recently, engineers and installers have recognized the benefits of using couplers to increase construction speed, improve productivity and simplify design details. There are numerous mechanical splicing systems available for use on rebar, many with elements of strength and/or operational compromise

• Couplers are designed and manufactured in compliance with ACI318, JGJ107, UBC 1997, BS8110, NF35-20-1, DIN1045, ISO/WD 15835 (Draft).
• Under Full-Tension the bar breaks during tensile tests, but Coupler the remains unbroken.
• Easy to operate and maintain, High production efficiency and fast installation, no need for skilled technicians.
• The splices can be produced in advance saving valuable construction time.
• Inexpensive to purchase, maintain and repair.
• Couplers and threaded bars are protected by plastic cover.
• Full traceability of material origin and production batch.

• No staggering of spliced bars required.
• Practical alternative to lap splicing.
• Solves bar congestion problems.
• Shortens construction cycle time.
• Reduces steel wastage.

• Delivery Time: Ex stock

• Minimum Order Quantity: 1 Unit
• Capacity: 45 liters
• Weight: 150 Kg
• Material: Stainless steel
• Power source: Electric
• Voltage: 220 V

Concrete Cutters is intended for industrial use.

• Minimum Order Quantity: 1 Unit
• Brand/Make: Hulk
• Capacity: 20/ 30 cuM/hr
• Automation Grade: Automatic
• Output: 25-28 m3/Hr
• Power Type: Electric

Batching Plant is intended for industrial use.

• PLC Coperated completely automatic control panel.
• Blade mixing technology with planetary gear - boxes.
• Electronic weighing system for better accuracy in design-mix.
• Separate weighing system for cement or fly-ash.
• Italian Screw feeder to pour cement speedily. (WAM make).
• Password locking facility.
• Water and ad-mix pour by weight.
• Pneumatically operated gate for aggregate & sand.
• Italian vibrators.
• Tabulated print out system for each batch.
• Skip Bucket feeding.
• Cement silo with vertical screw feeder (Optional) Hydraulic discharge system

• Minimum Order Quantity: 1 Unit
• Capacity: 1500 Kg
• Lifting height: 80 Feet
• Power: 7.5 kW
• Speed: 24 m/min
• Rope Diameter: 12 mm

Building Hoist is intended for industrial use.

• Minimum Order Quantity: 1 Unit
• Load Capacity: 0-1 ton
• Type: Material Hoist
• Mounting: Suspension
• Brand: Hulk

Monkey Lift is intended for industrial use.

Plate Compactors is intended for industrial use.

• Whether you work with compactors every day or you just need one every now and then for your projects, Lokpal offers quality, long-lasting plate compactors at amazing prices. Our plate compactors work with all types of materials including asphalt, dirt and cement.

• Minimum Order Quantity: 1 Unit

• Minimum Order Quantity: 1 Unit

Portable Hoister is Convenient Light weight 3 piece design can be easily dismantled and carried from floor to floor.

• For use in small construction sites.
• Easy to move floor to floor.
• Very Portable and light weight.

• Minimum Order Quantity: 1 Unit

Scaffolding Arm Hoist is intended for industrial use.

• Can be Suspended form the existing Scaffolding
• No additional expense for Suspension device

• Minimum Order Quantity: 1 Unit

Power Trowel Cum Floater is intended for industrial use.

• Minimum Order Quantity: 1 Unit

Lifts is intended for use at different construction site.

• Minimum Order Quantity: 1 Unit

Scaffold Hoist can be installed inside & outside the scaffold. No need of additional wall support or wall ties to anchor to the building separately.

Can be installed by one man / operator. Easy to dismantle, only 3 Bolts.

The safest safety system in the market :

• Emergency Brake
• Brake Motors
• Centrifugal Brake
• Top & Bottom Limit
• Switches
• Gate Switches etc

Electric Cable winder & Lightweight Aluminium alloy column (Optional)

• Minimum Order Quantity: 1 Unit

A large number of commercial high-rise buildings in India now have external glass curtain walls. Such buildings require constant maintenance, This is highly dangerous work which should be carried out by cleaners using Suspended Cradle System with a Cradle suspended f rom the roof whi ch replaces conventional scaffoldings. The system can be used for external brickwork, plastering, painting, finishing etc.

Lokpal industries offers such sophisticated systems consisting of an electrically operated Hoisting machine incorporating a ‘a’ cable guidance system and Anti Inclination safety locks as well as Speed Limit safety locks. These are available upto 800kg capacity. These Cradle systems are easy to install on the roof of the building. The height of the suspension Jib, as well as the projecting length (front beam) is adjustable so the system can easily adapt to different Facades and Fascia's as well as roof structures. Special systems can be designed to suit the users non standard requirements.

• Minimum Order Quantity: 1 Unit

Mini Lift is Convenient Light weight 4 piece design can be easily dismantled and carried from floor to floor.

• Minimum Order Quantity: 1 Unit

Pan Mixer, Mortar Mixer is intended for industrial use.

• Minimum Order Quantity: 1 Unit

• Minimum Order Quantity: 1 Unit
• Motor: 1.5 kw/3Phase
• Cross Travel: 4750 mm
• Lifting Capacity: 500 Kg
• Lifting Height: 100 mtr wire rope
• Length: 50 mtr

Construction Lift is intended for industrial use.

Programmable Steel Bar Straightening & Cutting Machine is intended for industrial use.

• Minimum Order Quantity: 1 Unit

Steel Stub Bar Straightening Machine is intended for industrial use.

• Minimum Order Quantity: 1 Unit

Mechanical Bar Splice (Coupler) are a parallel thread mechanical splicing system designed for the connection of concrete reinforcing bars from Ö12~Ö50. Mechanical couplers to splice reinforcing bar has been regarded as a means of reducing the use of long bars and reduce wastage of expensive rebar's due to Splice lapping of the ends in the conventional methods of joining rebar's. More recently, engineers and installers have recognized the benefits of using couplers to increase construction speed, improve productivity and simplify design details. There are numerous mechanical splicing systems available for use on rebar, many with elements of strength and/or operational compromise

• Couplers are designed and manufactured in compliance with ACI318, JGJ107, UBC 1997, BS8110, NF35-20-1, DIN1045, ISO/WD 15835 (Draft).
• Under Full-Tension the bar breaks during tensile tests, but Coupler the remains unbroken.
• Easy to operate and maintain, High production efficiency and fast installation, no need for skilled technicians.
• The splices can be produced in advance saving valuable construction time.
• Inexpensive to purchase, maintain and repair.
• Couplers and threaded bars are protected by plastic cover.
• Full traceability of material origin and production batch.

• No staggering of spliced bars required.
• Practical alternative to lap splicing.
• Solves bar congestion problems.
• Shortens construction cycle time.
• Reduces steel wastage

• Minimum Order Quantity: 1 Unit

The Mast Climbing Work Platform is a perfect platform for all Brickwork, Plastering, Glass and Aluminium Fixing, Painting & Facade Restoration work. It is a flexible lightweight transport platform easy to shift from place to place.

• Minimum Order Quantity: 1 Unit

• Minimum Order Quantity: 1 Unit
• Brand: Hulk

Rack & Pinion Hoist is Lightweight, easy to shift from place to place.

• Brake motors with planetary gear box.
• As per European safety standards

• Minimum Order Quantity: 1 Piece
• Brand: HULK

• Compact design
• Easy maintenance
• Longer service life

• It consists one each of: cylindrical core cutter mode of steel, 127.3 mm
• Steel dolly, 25 mm high
• Long and 100 mm internal diameter